特点
1.电动吸引器由负压泵、负压调节器、负压指示器、收集容器组件、脚踏开关、机箱
组成;
2.可满足各类医院和医疗单位在医疗手术时需要高效率、大流量吸引的要求,供医
疗单位作手术吸引脓血和各种粘质分泌物用;
3、立式结构、设计新颖、外型美观;
4、采用双头活塞式真空泵作为负压吸引源,噪音小;
5、设有防溢流安全装置,保养维护工作简单,无需加油;
6、手动和脚踏开关并联任意使用,操作方便;
7、电动吸引器按防电击类型及程度分类为I类设备B型应用部分，运行模式为间歇
加载连续运行(间歇吸引), IPX0、非AP型或APG型普通设备;
8、产品符合GB9706.1. YY0505、YY0636.1相关要求。
技术指标
1、负压极限值:≥0.09MPa (680mmHg) ;
2、负压调节范围:0.02~0.09MPa (150~680mmHg) ;
3、抽气速率:泵口(出气口)≥35L/min,终端≥25L/min;
4、电源:AC220V土22V, 50Hz士1Hz;
5.功率:≤280VA;
6、噪声:< 60dB;
7、收集容器容量:2500mlX2;
8、工作环境:温度+5°C~+35°C,相对湿度:25°C不超过80%,大气压力:86KPa~ 106KPa。
Features
1. The electric suction device consists of a negative pressure pump, a negative pressure regulator, a negative pressure indicator, a collection container assembly, a foot switch, and a chassis
composition;
2. It can meet the requirements of various hospitals and medical units that require high efficiency and large flow attraction during medical operations.
The treatment unit is used for surgery to attract pus and blood and various mucous secretions;
3. Vertical structure, novel design, beautiful appearance;
4. Double-head piston vacuum pump is used as the suction source of negative pressure, with low noise;
5. Equipped with anti-overflow safety device, maintenance work is simple, no need to refuel;
6. The manual and foot switch can be used in parallel, and the operation is convenient;
7. According to the type and degree of protection against electric shock, the electric suction device is classified as the application part of type I equipment and type B, and the operation mode is intermittent.
Load continuous operation (intermittent suction), IPX0, non-AP type or APG type ordinary equipment;
8. The product meets the relevant requirements of GB9706.1. YY0505 and YY0636.1.
Technical index
1. Negative pressure limit value: ≥0.09MPa (680mmHg);
2. Negative pressure adjustment range: 0.02~0.09MPa (150~680mmHg);
3. Pumping rate: pump port (air outlet) ≥35L/min, terminal ≥25L/min;
4. Power supply: AC220V ± 22V, 50Hz ± 1Hz;
5. Power: ≤280VA;
6. Noise: <60dB;
7.Capacity of collection container: 2500mlX2;
8. Working environment: temperature +5°C~+35°C, relative humidity: 25°C no more than 80%, atmospheric pressure: 86KPa~106KPa.
